Product Name: Glacial Acetic Acid

Product Category: Textile printing ,dyeing

Items	pecification
GLACIAL ACETIC ACID %	99%Min	99.5%Min	99.8%Min
Acetaldehyde%	0.05%Max	-	0.05 max
The heavy metal (as Pb counts)%	0.0002%Max	-	-
Formic acid%	0.15%Max	0.10 max	-
Evaporates the resdual %	0.3%Max	-	-
iron%	0.01%Max	2ppm	2ppm
Chloride	0.1%Max	3ppm	1ppm
Sulphate	0.15%Max	2ppm	0.15%Max

Packing: 25kg or 30kg or 220kgs in Plastic drum, 18/17.6MT in the 20扚CL

Uses: used in such products as Vinyl acetate, acetic anhydride, diketene, acetate ester, acetate, acetate fiber and chloroactic acid etc. It is an important raw material for synthesized fiber, gooey, medicines, pesticides and dyes, and also a good organic solvent. It is widely applied in such industries as of plastics, rubbers and printing etc.

Acetic Acid 's Molecular formula: C₂H₄O₂ 
Acetic Acid 's Molar mass: 60.05
Density: 1.0490
Structure:
Melting point: 16.6℃
Boiling point: 117.9℃
Flash point: 43℃
Ignition temperature: 465℃
Other names: ethanoic acid, vinegar acid.
Acetic Acid is a colorless, pungent liquid that is miscible with water, alcohol, and ether in all proportions.
Acetic acid is the active ingredient in vinegar, in which the content ranges from 4 to 5% acetic acid.
Acetic acid is classified as a weak, monobasic acid (-CO₂H) but the three hydrogen atoms linked to the carbon atom (CH₃) are not replaceable by metals.

Concentrated acetic acid is corrosive and must therefore be handled with appropriate care, since it can cause skin burns, permanent eye damage, and irritation to the mucous membranes. These burns or blisters may not appear until hours after exposure.Latex gloves offer no protection, so specially resistant gloves, such as those made of nitrile rubber, should be worn when handling the compound.
Concentrated acetic acid can be ignited with difficulty in the laboratory. It becomes a flammable risk if the ambient temperature exceeds 39 °C (102 °F), and can form explosive mixtures with air above this temperature (explosive limits: 5.4%–16%).
Hazard Codes: C: Corrosive;
Risk Statements:
35:  Causes severe burns  
10:  Flammable 
Safety Statements: 
26:  In case of contact with eyes, rinse immediately with plenty of WATER and seek medical advice  
45:  In case of accident or if you feel unwell, seek medical advice immediately (show label where possible) 
23:  Do not breathe gas/fumes/vapor/spray (appropriate wording to be specified by the manufacturer)  
WGK Germany:  3
F  1-8-10 : Sensitive to air and humidity; Photosensitive; Keep under ARGON.